DADA TECHNOLOGY · ENGINEERED REFRACTORIES · GLOBAL SUPPLY
EnglishEspañolFrançaisDeutschالعربية
DADATECINDUSTRIAL MATERIALS

Refractory Castables for Petrochemical Furnaces

Dense and insulating castables for petrochemical thermal-processing equipment.

Refractory and silicon carbide product range

Corundum, bubble-alumina, high-alumina and clay-based options provide different density and service-temperature ranges. Specify the furnace zone and exposure rather than treating the grades as interchangeable.

Typical applications

  • Reformers, ethylene cracking furnaces and carbon-black furnaces
  • Gasification and other petrochemical furnace lining zones
Refractory Castables for Petrochemical Furnaces

Technical specifications

Refractory Castables for Petrochemical Furnaces
Product familyCorundum wear-resistant castablesAlumina bubble castablesHigh-alumina castablesClay-based castables
GradeCC-32CC-31AC-1.4AC-1.6LC-2.4LC-2.5NC-2.2
Al₂O₃ (%, ≥)98969294607540
CaO (%, ≥; inequality retained as published)0.51.01.00.51.82.54.2
Bulk density (g/cm³)110℃×24h3.23.11.41.62.42.52.3
1450℃×4h3.153.051.31.52.302.402.10
Compressive strength (MPa)110℃×24h32261214607075
1450℃×4h45552430859398
Flexural strength (MPa)110℃×24h651.52.581011
1450℃×4h10847—1214
Permanent linear change after heating (%)1000℃×4h————±0.2—±0.5
1500℃×4h±0.2±0.3±0.5±0.5—±0.5—
Mixing water (%)5-5.55.5-612-1511-146-86.5-7.57-8
Maximum service temperature (°C)1600150015001500135014001200

Data clarification

Published reference figures are not a certified specification for the quoted batch. Confirm the grade, test method, furnace conditions and acceptance requirements before ordering. A dash means no value was stated; classification temperature is not a continuous-service guarantee.

  • The CaO row is marked ≥ in the reference. This inequality has not been changed to a presumed maximum.
  • NC-2.2 has a dried bulk density of 2.3 in the table; the grade name has not been used to overwrite it. Missing flexural-strength and linear-change cells remain unfilled.

Information for quotation

Send the product or grade, furnace zone, operating temperature and atmosphere, dimensions or lining drawing, quantity and delivery destination.