Insulating Fire Bricks

YDM Series Lightweight Insulating Firebricks
1. YDM series insulating firebricks have a bulk density of 0.5–1.3 g/cm³ and a service temperature range of 1250–1550 °C. Each formulation offers different properties to suit different kiln conditions.
2. The bricks are made from high-purity raw materials, with a combustible filler selected for each grade. The filler burns out during high-temperature firing, leaving a uniform pore structure.
3. Every face of each brick is machined to the customer’s specified dimensions to ensure a quality kiln lining.
1. Low thermal conductivity provides effective insulation.
2. Low heat storage reduces energy consumption in intermittent operation.
3. Low levels of impurities, including iron and alkali metal oxides, contribute to high refractoriness. The high alumina content supports performance in reducing atmospheres.
4. High hot crushing strength.
5. Close dimensional tolerances speed installation, reduce mortar consumption and joint widths, improve masonry stability, and extend lining life.
6. Custom shapes can be machined to suit kiln designs.
Maximum service temperature: Grade 23 — 1300 °C · Grade 26 — 1400 °C · Grade 28 — 1500 °C · Grades 30/32 — 1550 °C
Applications
Suitable for hot-face refractory linings or as backup insulation behind other refractories. Applications include ceramics, metallurgy, petroleum, carbon products, glass, and chemicals, in equipment such as high-temperature tunnel and shuttle kilns, roller kilns, ethylene cracking furnaces, heating furnaces, ammonia synthesis reformers, and gasifiers.



YDM-23 Lightweight Insulating Firebricks
Confirm the proposed grade, dimensions and operating conditions with our technical team. See the YDM series overview above.
Applications
Review the YDM series applications above and confirm suitability for your furnace conditions.

| Property / Grade | Type | Chemical Composition, % | Bulk Density, g/cm³ | Permanent Linear Change | Cold Crushing Strength, MPa | Cold Modulus of Rupture MPa | Thermal Conductivity at 350 °C, W/(m·K) | ||
|---|---|---|---|---|---|---|---|---|---|
| Al₂O₃ | SiO₂ | Fe₂O₃ | |||||||
| YDM-23 | 1 | 42 | 54 | 1.3 | 0.5 | 1200℃x12h -1% | 1.0 | 0.9 | 0.16 |
| 2 | 42 | 54 | 1.3 | 0.55 | 1200℃×12h -0.7% | 1.3 | 1.0 | 0.17 | |
| 3 | 43 | 53 | 1.3 | 0.6 | 1250℃×12h -0.7% | 1.6 | 1.1 | 0.19 | |
| 4 | 45 | 52 | 1.0 | 0.8 | 1300℃×12h -0.7% | 2.0 | 1.4 | 0.27 | |
| 5 | 46 | 51 | 1.0 | 1.0 | 1300℃×12h -0.8% | 3.5 | 1.8 | 0.37 | |
YDM-26 Lightweight Insulating Firebricks
Confirm the proposed grade, dimensions and operating conditions with our technical team. See the YDM series overview above.
Applications
Review the YDM series applications above and confirm suitability for your furnace conditions.

| Property / Grade | Type | Chemical Composition, % | Bulk Density, g/cm³ | Permanent Linear Change 1400 °C × 12 h | Cold Crushing Strength, MPa | Cold Modulus of Rupture MPa | Thermal Conductivity at 350 °C, W/(m·K) | ||
|---|---|---|---|---|---|---|---|---|---|
| Al₂O₃ | SiO₂ | Fe₂O₃ | |||||||
| YDM-26 | 1 | 53 | 42.5 | 0.8 | 0.7 | -0.9% | 2.0 | 1.2 | 0.25 |
| 2 | 53 | 41.5 | 0.8 | 0.8 | -0.8% | 2.5 | 1.4 | 0.27 | |
| 3 | 55 | 40.5 | 0.9 | 0.9 | -0.7% | 3.0 | 1.6 | 0.33 | |
| 4 | 55 | 40.5 | 0.9 | 1.0 | -0.7% | 3.5 | 1.8 | 0.37 | |
YDM-28 Lightweight Insulating Firebricks
Confirm the proposed grade, dimensions and operating conditions with our technical team. See the YDM series overview above.
Applications
Review the YDM series applications above and confirm suitability for your furnace conditions.

| Property / Grade | Type | Chemical Composition, % | Bulk Density, g/cm³ | Permanent Linear Change | Cold Crushing Strength, MPa | Cold Modulus of Rupture MPa | Thermal Conductivity at 350 °C, W/(m·K) | ||
|---|---|---|---|---|---|---|---|---|---|
| Al₂O₃ | SiO₂ | Fe₂O₃ | |||||||
| YDM-28 | 1 | 58 | 33 | 0.8 | 0.9 | 1450℃×12h -1.0% | 3.0 | 1.6 | 0.33 |
| 2 | 60 | 32 | 0.8 | 1.0 | 1500℃×12h -1.0% | 3.5 | 1.8 | 0.35 | |
| 3 | 63 | 31 | 0.7 | 1.2 | 1500℃×12h -0.8% | 4.5 | 2.0 | 0.37 | |
YDM-30/32 Lightweight Insulating Firebricks
Confirm the proposed grade, dimensions and operating conditions with our technical team. See the YDM series overview above.
Applications
Review the YDM series applications above and confirm suitability for your furnace conditions.

| Property / Grade | Type | Chemical Composition, % | Bulk Density, g/cm³ | Permanent Linear Change | Cold Crushing Strength, MPa | Cold Modulus of Rupture MPa | Thermal Conductivity at 350 °C, W/(m·K) | ||
|---|---|---|---|---|---|---|---|---|---|
| Al₂O₃ | SiO₂ | Fe₂O₃ | |||||||
| YDM-30 | 1 | 70 | 27 | 0.7 | 1.0 | 1550℃×12h -0.9% | 3.5 | 1.8 | 0.42 |
| 2 | 72 | 26 | 0.7 | 1.0 | 1550℃×12h -0.8% | 3.5 | 1.9 | 0.46 | |
| YDM-32 | 3 | 73 | 25 | 0.7 | 1.0 | 1600℃×12h -1.0% | 3.5 | 1.9 | 0.42 |
| 4 | 75 | 24 | 0.7 | 1.0 | 1600℃×12h -0.9% | 3.5 | 2.0 | 0.46 | |