DADA TECHNOLOGY · ENGINEERED REFRACTORIES · GLOBAL SUPPLY
EnglishEspañolFrançaisDeutschالعربية
DADATECINDUSTRIAL MATERIALS

Setters & Saggars

Drawing-based supports and containers locate ware and separate it from adjacent kiln furniture. Geometry depends on shrinkage, contact marks and atmosphere.

Mullite–Cordierite Setters & Saggars

Mullite–cordierite setters and saggars are refractory ceramic components used as kiln furniture to hold, protect, and transport products during high-temperature processing. Cordierite (2Al₂O₃ · 2MgO · 5SiO₂) has a very low coefficient of thermal expansion and improves resistance to cracking during rapid heating and cooling. Mullite (3Al₂O₃ · 2SiO₂) contributes refractoriness, mechanical strength, and resistance to creep at high temperatures. The composite combines these phases with secondary glass phases to balance low weight and thermal efficiency with structural rigidity.

A saggar (also spelled sagger or segger) is a boxlike ceramic container that encloses and protects ware during firing. The name may be a contraction of “safeguard.” Saggars are still used to shield ware from direct flame, smoke, gases, and kiln debris. Traditionally made primarily from fireclay, modern saggars are made from alumina, cordierite, mullite, silicon carbide, and, for specialized applications, zirconia.

Advantages

  • Thermal Shock Stability: Withstands repeated, rapid thermal cycling without fracturing.
  • Low Thermal Expansion: Minimizes dimensional warping or distortion under fluctuating kiln temperatures.
  • High-Temperature Strength: Retains shape and load-bearing capacity under heavy stacking or long firing runs.
  • Cost-Effectiveness: Offers an economical alternative to more expensive pure-alumina or zirconia furniture for medium-temperature ranges (typically under 1,200°C–1,250°C)
Round mullite–cordierite setter with three supportsRound ceramic saggar with a notched base

Y, T & X Integrated Kiln Supports

Mullite–cordierite supports with an integral plate and three feet. The renderings show each type’s shape and foot layout.

Y-type support

ModelMax. diameter ØD (mm)Max. plate base diameter Ød (mm)Overall height H (mm)Clearance height h (mm)
Y 12201855040
Y 22502045140
Y 32602255545
Y 42702045645
Y 53002605240
Y 63402756450
Y 73603306750
Y-type mullite–cordierite support, low side-angle view

T-type support

ModelMax. diameter ØD (mm)Max. plate base diameter Ød (mm)Overall height H (mm)Clearance height h (mm)
T 11741403828
T 21741404535
T 31901404535
T-type mullite–cordierite support, low side-angle view

X-type support

ModelMax. diameter ØD (mm)Max. plate base diameter Ød (mm)Overall height H (mm)Clearance height h (mm)
X 12301584837
X 22501624838
X 32802004535
X 42952104029
X 53152284533
X 63402364635
X-type mullite–cordierite support, low side-angle view

Round Saggars

S1 round saggar

TypeOuter diameter OD (mm)Height H (mm)Inner opening diameter D1 (mm)Inner bottom diameter D2 (mm)Internal depth h (mm)
S11962917012211
S12003517511015
S12204918011532
S12382720313211
S12383120413215
S12523919813815.5
S12803225015815
S12904324813622.5
S13364128619618
S136247.532623518
S1 section drawing
S1 section drawing showing OD, H, D1, D2 and h and the base air opening
S1 round saggar product view

S2 round saggar

TypeOuter diameter OD (mm)Height H (mm)Inner opening diameter D1 (mm)Inner bottom diameter D2 (mm)Internal depth h (mm)
S22522819013018
S23305127318720
S23365127919320
S23514029420815
S23734031623015
S2 section drawing
S2 section drawing showing OD, H, D1, D2 and h
S2 round saggar product view

Customizing service is available upon technical drawing or sketch from customers.

Technical support