Solid Batts / Plates / Shelves
Pressed or cast solid kiln furniture plates support ceramic ware on a defined span. Flatness, edge finish and setter contact affect ware stability.

Cordierite-mullite combines low thermal expansion with reliable high-temperature strength, giving kiln furniture excellent resistance to repeated heating and cooling. Typical service temperatures are up to approximately 1350°C, subject to load, atmosphere and firing cycle.
Recommended products: solid kiln batts, extruded hollow batts, posts, cranks, setters, saggars and crucibles for tableware, sanitaryware, tiles and electrical porcelain.
For material selection and quotation, send your drawing or required dimensions together with operating temperature, atmosphere, support spacing, load and expected quantity.
Key advantages:
- Low co-efficient of thermal expansion for superior resistance to cracking under thermal shock
- Versatile forming methods to suit simple or complex geometries
- Competitive material cost relative to corundum-based alternatives
- Available in standard, lightweight, and anti-deformation grades to match specific firing curves and load requirements


Technical Specification
Technical Data
| Property | Unit | BOA | BOB | BOD | BOE |
|---|---|---|---|---|---|
| Al₂O₃ | % | 35 | 39 | 40 | 60 |
| SiO₂ | % | 53 | 49 | 50 | 35 |
| MgO | % | 7.5 | 8.0 | 6.5 | 5.0 |
| Bulk density | g/cm³ | 1.85 | 1.82 | 1.95 | 2.20 |
| Apparent porosity | % | 28 | 30 | 24 | 22 |
| M.O.R. at 20 °C | MPa | 14 | 11 | 10 | 11 |
| M.O.R. at 1250 °C | MPa | 10 | 10 | 9 | 10 |
| C.T.E. at 20–1000 °C | 10⁻⁶ K⁻¹ | 2.6 | 2.2 | 2.2 | 3.2 |
| Specific heat at 20 °C | kJ/(kg·K) | 1.0 | 1.0 | 1.0 | 1.0 |
| Thermal shock resistance | Rating | ★★★★ | ★★★★☆ | ★★★★★ | ★★★ |
| Max. working temperature | °C | 1300 | 1280 | 1250 | 1350 |
Basic Dimensions
| Length (mm) | Width (mm) | Thickness (mm) |
|---|---|---|
| 230–280 | 115–180 | 5–20 |
| 300–355 | 165–180 | 5–20 |
| 280–550 | 220–280 | 5–20 |
| 300–700 | 290–350 | 5–20 |
| 360–700 | 360–430 | 5–20 |
| 440–790 | 440–500 | 5–20 |
| 520–750 | 505–550 | 5–20 |
| 610–1000 | 600–750 | 5–20 |
Ranges summarize similar sizes. Confirm the exact length, width and thickness combination before ordering.
Customizing service is available upon technical drawing or sketch from customers.
Technical supportApplication Photos
View 01
View 02
View 03Detail tiles are crops of the referenced photograph, not additional installations. Application and assembly references are not claimed DADATEC customer installations; confirm the material grade for your process.