Posts & Supports
Vertical posts carry successive shelf levels. End-face parallelism and matching contact areas help maintain alignment of the kiln setting.

Mullite-cordierite Posts & Supports are specialized refractory components used in high-temperature kilns to hold and separate kiln shelves (batts).
With key characteristics & properties including: Material Composition, Service Temperature, Thermal Shock Resistance and Mechanical Strength. Mullite-cordierite Posts & Supports combines a cordierite phase (for low thermal expansion and thermal shock resistance) with a mullite phase (for high-temperature strength and load-bearing capacity). It typically operates reliably at temperatures up to 1200°C–1250°C, depending on the specific load, firing cycle, and atmosphere. withstands rapid heating and cooling cycles much better than pure mullite without cracking. Besides, it offers higher structural integrity and resistance to bending under weight than standard porous cordierite alone.
Typical Applications
- Ceramic art and pottery kilns (stacking shelves)
- Tableware and sanitaryware manufacturing
- Electrical porcelain and insulator firing
- Technical ceramic and powder calcination processes


Post Dimensions
Square Hollow Posts
| Item | Cross-section A × B (mm) | Opening a × b / ID (mm) | Length L (mm) |
|---|---|---|---|
| 1 | 40x50 | 26x36 | 20~500 |
| 2 | 45x45 | 30x30 | 20~500 |
| 3 | 50x60 | 30x40 | 20~700 |
| 4 | 75x75 | 39x39 | 20~800 |
| 5 | 80x80 | 46x46 | 20~800 |
| 6 | 100x100 | 50x50 | 20~1000 |
| 7 | 105x105 | 53x53 | 20~1000 |
| 8 | 125x125 | 55x55 | 20~1000 |
| 9 | 150x150 | 70x70 | 20~1000 |
| 10 | 150x150 | 75x75 | 20~1000 |

Diamond Hollow Posts
| Item | Cross-section A × B (mm) | Opening a × b / ID (mm) | Length L (mm) |
|---|---|---|---|
| 1 | 70x70 | 40x40 | 10-1000 |
| 2 | 70x70 | 44x44 | 10-1000 |
| 3 | 80x80 | 40x40 | 10-1000 |
| 4 | 80x80 | 50x50 | 10-1000 |
| 5 | 90x90 | 50x50 | 10-1000 |
| 6 | 100x100 | 60x60 | 10-1000 |

I-Section Posts
| Item | Height / effective height H / H-h (mm) | A × B / OD (mm) | Remark w | Item | Height / effective height H / H-h (mm) | A × B / OD (mm) | Remark w |
|---|---|---|---|---|---|---|---|
| 1 | 60 | 40 x 50 | 13 | 120-110eh | 90 x 90 | 45 | |
| 2 | 72 | 70 x 80 | 14 | 127 | 75 x 75 | ||
| 3 | 80 | 40 x 50 | 15 | 130 | 45 x 60 | ||
| 4 | 80 | 45 x 60 | 16 | 130-120eh | 110 x 110 | 60 | |
| 5 | 90 | 40 x 60 | 17 | 135 | 50 x 60 | ||
| 6 | 100 | 45 x 60 | 18 | 140 | 50 x 60 | ||
| 7 | 100 | 50 x 60 | 19 | 145 | 45 x 60 | ||
| 8 | 100 | 70 x 80 | 20 | 150 | 45 x 60 | ||
| 9 | 110 | 45 x 60 | 21 | 150 | 70 x 80 | ||
| 10 | 120 | 40 x 60 | 22 | 150 | 100 x 100 | ||
| 11 | 120 | 45 x 60 | 23 | 150-140eh | 100 x 100 | 45 | |
| 12 | 120 | 70 x 80 | 24 | 150-145eh | 90 x 90 | 50 |




Round Hollow Posts
| Item | Outer × inner diameter OD × ID (mm) | Length L (mm) | Item | Outer × inner diameter OD × ID (mm) | Length L (mm) |
|---|---|---|---|---|---|
| 1 | ∅35 x ∅20 | 20~500 | 11 | ∅65 x ∅40 | 20~800 |
| 2 | ∅40 x ∅20 | 20~600 | 12 | ∅70 x ∅35 | 20~900 |
| 3 | ∅44 x ∅25 | 20~600 | 13 | ∅70 x ∅40 | 20~900 |
| 4 | ∅50 x ∅25 | 20~700 | 14 | ∅70 x ∅50 | 20~900 |
| 5 | ∅50 x ∅30 | 20~700 | 15 | ∅75 x ∅35 | 20~900 |
| 6 | ∅56 x ∅42 | 20~700 | 16 | ∅75 x ∅45 | 20~900 |
| 7 | ∅60 x ∅30 | 20~800 | 17 | ∅75 x ∅50 | 20~900 |
| 8 | ∅60 x ∅35 | 20~800 | 18 | ∅80 x ∅45 | 40~1000 |
| 9 | ∅60 x ∅40 | 20~800 | 19 | ∅85 x ∅40 | 40~1000 |
| 10 | ∅65 x ∅28 | 20~800 | 20 | ∅90 x ∅50 | 40~1000 |

Customizing service is available upon technical drawing or sketch from customers.
Technical supportApplication photos and example
View 01
View 02
View 03Detail tiles are crops of the referenced photograph, not additional installations. Application and assembly references are not claimed DADATEC customer installations; confirm the material grade for your process.
Illustrative application example
Aligned posts transfer load vertically through a kiln-car stack. Check cumulative weight and stability of the complete assembly.