High-Alumina Bricks

Alumina Bubble Bricks
Confirm the proposed grade, dimensions and operating conditions with our technical team.
Applications
Linings and thermal insulation for high-temperature kilns in industrial and electronic ceramics, petrochemicals, metallurgy, and refractory manufacturing.

| Property | Alumina Bubble Brick | Alumina–Zirconia Bubble Brick | ||
|---|---|---|---|---|
| Grade 85 | Grade 90 | Grade 99 | Grade 98 | |
| Maximum Service Temperature, °C | 1680 | 1700 | 1800 | 2200 |
| Al₂O₃ % | ≥85 | ≥90 | ≥99 | - |
| ZrO₂% | - | - | - | ≥98 (including stabilizer) |
| SiO₂ % | ≤13 | ≤8 | ≤0.2 | ≤0.2 |
| Fe₂O₃% | ≤0.2 | ≤0.2 | ≤0.2 | ≤0.2 |
| Bulk Density, g/cm³ | 1.4~1.7 | 1.4~1.7 | 1.4~1.7 | ≤3.0 |
| Cold Crushing Strength, MPa | ≥12 | ≥10 | ≥9 | ≥8 |
| Initial Softening Temperature under Load, °C (0.1 MPa, 0.6%) | ≥1650 | ≥1700 | ≥1700 | ≥1700 |
| Permanent Linear Change, % (1600 °C × 3 h) | 0.3 | 0.3 | 0.3 | 0.2 |
| Thermal Expansion Coefficient ×10 (room temperature to 1300 °C) | 7.8 | 8.0 | 8.6 | 9.1 |
| Thermal Conductivity, W/(m·K) (mean temperature 800 °C) | ≤0.8 | ≤1.3 | ≤1.5 | ≤0.3 |
High-Alumina Bricks
1. Low impurity content, using high-quality high-alumina bauxite.
2. High refractoriness under load.
3. Good high-temperature creep resistance.
4. High cold crushing strength.
Forming: The bricks are formed by mechanical pressing with vibration or by semi-dry ramming, then dried and fired at high temperature.
Applications
1. High-alumina bricks are a preferred choice for a range of high-temperature kilns.
2. High-alumina roller-hole bricks support and stabilize drive rollers in roller kilns.

| Property | Specifications | ||||
|---|---|---|---|---|---|
| LZ75 | LZ65 | LZ55 | LZ48 | ||
| Al₂O₃ % | ≥75 | ≥65 | ≥55 | ≥48 | |
| Refractoriness, °C | ≥1790 | ≥1790 | ≥1770 | ≥1750 | |
| Refractoriness under load (0.2), °C | ≥1520 | ≥1500 | ≥1470 | ≥1420 | |
| Permanent Linear Change, % | 1500×2h | +0.1~0.4 | |||
| 1450×2h | +0.1~0.4 | ||||
| Apparent Porosity, % | ≤23 | ≤22 | |||
| Cold Crushing Strength, MPa | ≥53 | ≥49 | ≥44 | ≥39.2 | |
High-Alumina Lightweight Insulating Bricks
Confirm the proposed grade, dimensions and operating conditions with our technical team.
Applications
Insulating refractory sections of kiln and furnace linings in steelmaking, electronics, petrochemicals, nonferrous metals, and refractory manufacturing.

| Property | YDLG-0.5 | YDLG-0.6 | YDLG-0.7 | YDLG-0.8 | YDLG-1.0 | YDLG-1.2 | YDLG-1.3 |
|---|---|---|---|---|---|---|---|
| Al₂O₃ % | 45 | 45 | 50 | 50 | 50 | 50 | 50 |
| Fe₂O₃ ≤ | 3.5 | 3.5 | 3.5 | 3.6 | 3.8 | 3.8 | 3.8 |
| Bulk Density, g/cm³ | 0.5 | 0.6 | 0.7 | 0.8 | 1.0 | 1.2 | 1.3 |
| Cold Crushing Strength, MPa, ≥ | 1.0 | 1.5 | 2.0 | 3.0 | 4.0 | 4.5 | 5.0 |
| Permanent Linear Change ≤2% (°C × h) | 1260 | 1260 | 1260 | 1300 | 1300 | 1300 | 1300 |
| Thermal Shock Resistance at 1100 °C, water quench (cycles), ≥ | 8 | 8 | 8 | 10 | 15 | 15 | 15 |
| Thermal Conductivity at 350 ±25 °C, W/(m·K), ≤ | 0.23 | 0.26 | 0.27 | 0.3 | 0.33 | 0.33 | 0.36 |