Furnace Bricks

Corundum–Mullite Bricks
Confirm the proposed grade, dimensions and operating conditions with our technical team.
Applications
Critical kiln and furnace areas in steelmaking, electronics, petrochemicals, nonferrous metals, and refractory manufacturing.

| Property | High-Purity Corundum Brick | Sintered White Corundum Brick | Mullite–Corundum Brick |
|---|---|---|---|
| Al₂O₃ % | ≥97 | ≥90 | ≥80 |
| SiO₂ % | ≤0.2 | ≤8 | ≤18 |
| Fe₂O₃ % | ≤0.2 | ≤0.2 | ≤0.3 |
| Bulk Density, g/cm³ | ≥3.2 | ≥3 | ≥2.8 |
| Apparent Porosity, % | ≤19 | ≤18 | ≤18 |
| Cold Crushing Strength, MPa | ≥100 | ≥100 | ≥100 |
| Initial Softening Temperature under Load, °C | ≥1700 | ≥1700 | ≥1700 |
Cordierite–Mullite Products
Description: High-quality mullite and cordierite aggregates and fines are mixed with binders, formed by mechanical pressing or semi-dry ramming, and fired at high temperature. Products can be tailored to different locations in a lining, with bulk density adjusted by varying the amount of combustible filler.
Features: 1. High crushing strength. 2. Good thermal shock resistance. 3. Long service life.
4. Custom shapes can be precision machined to customer requirements.
Applications
Kiln car deck bricks and linings for coke ovens, hot-blast stoves, heating furnaces, tunnel kilns, and shuttle kilns. Also used to support and stabilize drive rollers in the high-temperature zones of roller kilns.

| Properties / Chemical Composition | Product Grade | |||
|---|---|---|---|---|
| TRESUM | TRETIC | TRXMUL | TREMHEM | |
| Al₂O₃% | 38 | 61 | 40 | 38 |
| SiO₂% | 51 | 32 | 47 | 52 |
| MgO% | 8 | 5 | 6 | 6.5 |
| Bulk Density, g/cm³ | 1.9 | 1.6 | 2.0 | 1.95 |
| Apparent Porosity, % | 28 | 26 | 24 | 26 |
| Cold Modulus of Rupture, MPa | 12 | 10 | 15 | 12 |
| Linear Thermal Expansion Coefficient, K⁻¹ (125–1000 °C) | 2.4×10⁻⁶ | 3.9×10⁻⁶ | 2.4×10⁻⁶ | 2.3×10⁻⁶ |
| Modulus of rupture at 1250 °C, MPa | 2.4×10⁻⁶ | 9 | 12 | 9 |
| Specific heat at 20 °C [unit unclear in source] | 1.0 | 0.8 | 1.0 | 1.0 |
| Maximum Operating Temperature, °C | 1350 | 1300 | 1250 | 1250 |
The source table lists 2.4 × 10⁻⁶ for the TRESUM modulus of rupture at 1250 °C.
Confirm the listed TRESUM modulus of rupture at 1250 °C before using it for engineering selection.
Carburization-Resistant Bricks
Description: Made from high-purity refractory raw materials, cast or extruded, and fired at high temperature.
Features: 1. Low impurity content. 2. Stable chemical properties. 3. Low permanent linear change.
4. Accurate dimensions. 5. Easy installation. 6. Custom shapes can be precision machined to customer designs.
Applications
Refractory insulation for controlled-atmosphere furnaces used in machinery manufacturing and for ceramic kiln linings.

| Grade / Property | KST-0.5 | KST-0.8 | KST-1.0 | KST-2.0 |
|---|---|---|---|---|
| Al₂O₃ ≥% | 42 | 48 | 48 | 50 |
| Fe₂O₃ ≤ % | 0.8 | 0.7 | 0.6 | 0.6 |
| Bulk Density, g/cm³ | 0.5 | 0.8 | 1.0 | 2.0 |
| Crushing Strength, MPa, ≥ | 1.3 | 3.0 | 4.0 | 25.0 |
| Permanent Linear Change, % | 1200℃×12h -0.6 | 1300℃×12h -0.4 | 1300℃×12h -0.4 | 1350℃×12h -0.2 |
| Thermal Conductivity, W/(m·K) | 0.18 | 0.35 | 0.45 | 1.60 |
| Maximum Service Temperature, °C | 1250 | 1300 | 1350 | 1350 |
Cenosphere and Fireclay Insulating Bricks
Confirm the proposed grade, dimensions and operating conditions with our technical team.
Applications
Insulating refractory sections of kiln and furnace linings in steelmaking, electronics, petrochemicals, nonferrous metals, and refractory manufacturing.

| Property | YDNG-0.5 | YDNG-0.6 | YDNG-0.7 | YDNG-0.8 | YDNG-0.9 | YDNG-1.0 | YDNG-1.3 |
|---|---|---|---|---|---|---|---|
| Bulk Density, g/cm³ | 0.5 | 0.6 | 0.7 | 0.8 | 0.9 | 1.0 | 1.3 |
| Cold Crushing Strength, MPa, ≥ | 1.5 | 1.5 | 2.0 | 3.5 | 3.0 | 3.5 | 4.0 |
| Permanent Linear Change ≤2% (°C × h) | 1000 | 1000 | 1000 | 1000 | 1000 | 1000 | 1000 |
| Thermal Conductivity at 350 ±25 °C, W/(m·K), ≤ | 0.19 | 0.22 | 0.25 | 0.27 | 0.3 | 0.35 | 0.40 |