The range includes corundum–spinel, alumina–magnesia, bauxite–spinel and insulating compositions. Installation may be by vibration or self-flowing placement depending on the grade.
Typical applications
- Steel ladle working linings and repair casting
- Permanent linings and ladle seating-block zones

Technical specifications
| Grade | Material | Chemical content (%, ≥) | Bulk density (g/cm³, ≥) | Flexural strength (MPa) | Compressive strength (MPa) | Linear change (%, 1600°C × 3 h) | |||
|---|---|---|---|---|---|---|---|---|---|
| 110°C × 24 h, ≥ | 1600°C × 3 h, ≥ | 110°C × 24 h, ≥ | 1600°C × 3 h, ≥ | ||||||
| DNC-1 | Corundum–spinel | Al₂O₃+MgO 90 | 3.0 | 5.0 | 10 | 25 | 70 | 0~+1.0 | |
| DNC-2 | Corundum–spinel | Al₂O₃+MgO 85 | 3.0 | 5.0 | 10 | 25 | 70 | 0~+1.0 | |
| DNC-3 | Alumina–magnesia | Al₂O₃+MgO 85 | 3.0 | 5.0 | 10 | 30 | 80 | 0~+1.0 | |
| DNC-4 | Bauxite–spinel | Al₂O₃+MgO 80 | 2.7 | 5.0 | 10 | 30 | 80 | 0~+1.0 | |
| DNC-5 | Alumina–magnesia | Al₂O₃+MgO 80 | 2.7 | 5.0 | 10 | 30 | 90 | 0~a+1.0 | |
| DNC-6 | Alumina–magnesia (air-setting) | Al₂O₃+MgO 60 | 2.7 | 5.0 | 10 | 30 | 80 | ±1.0 | |
| DNP | Aluminosilicate (self-flowing) | Al₂O₃ 60 | 2.3 | 5.0 | 10(1500℃) | 25 | 10(1500℃) | ±0.5(1500℃) | |
| DNP-M | Lightweight mullite | Al₂O₃ 60 | 1.8 | 4.0 | 10(1500℃) | 20 | 45(1500℃) | ±2.5(1500℃) | |
| DNCB | Alumina–chromia | Al₂O₃+Cr₂O₃ 85 | 3.0 | 5.0 | 10 | 30 | 100 | ±2.5 | |
Data clarification
Published reference figures are not a certified specification for the quoted batch. Confirm the grade, test method, furnace conditions and acceptance requirements before ordering. A dash means no value was stated; classification temperature is not a continuous-service guarantee.
- The DNC-5 linear-change value is printed 0~a+1.0 and remains unresolved. The narrative and table use different spellings for certain permanent-lining and seating-block grade codes.
- Entries explicitly marked 1500°C use that temperature rather than the general 1600°C header. Confirm test methods and grade-specific drying requirements.
Information for quotation
Send the product or grade, furnace zone, operating temperature and atmosphere, dimensions or lining drawing, quantity and delivery destination.