DADA TECHNOLOGY · ENGINEERED REFRACTORIES · GLOBAL SUPPLY
EnglishEspañolFrançaisDeutschالعربية
DADATECINDUSTRIAL MATERIALS

Mullite Insulating Bricks

Insulating mullite bricks for furnace linings, kiln walls and suspended roof systems.

Refractory and silicon carbide product range

Available in lightweight grades and shaped pieces for insulation layouts. The range covers bell furnaces, reheating and heat-treatment furnaces, cracking furnaces and ceramic kilns.

Typical applications

  • Industrial furnace wall and roof insulation
  • Shuttle, tunnel and roller kiln linings
Mullite Insulating Bricks

Technical specifications

Mullite Insulating Bricks — table 1
Property / gradeHh23Hh26BHh26AHa28Hh30Hh32
Classification temperature (°C)1250125013001400150015501600
Density (kg/m³)50060080080090010001100
Reheat shrinkage (4 h; temperature in parentheses; unit unconfirmed)0.4 (1200)0.4 (1230)0.4 (1300)0.5 (1400)0.7 (1500)0.7 (1550)0.7 (1600)
Compressive strength (MPa)1.0l.11.81.92.52.83.0
Flexural strength (unit printed as Wpa; verify)0.70.81.21.21.41.61.8
Thermal conductivity at 350°C (unit notation incomplete; verify)0.150.150.260.260.330.380.43
Thermal expansion (temperature in parentheses; unit unconfirmed)0.46 (1000)0.46 (1000)0.46 (1000)0.47 (1000)0.48 (1000)0.48 (1000)0.49 (1000)
Chemical composition (%)Al₂O₃405256657278
Fe₂O₃1.00.850.80.80.70.5
Mullite Insulating Bricks — table 2
Property / gradeB1B2B4B5B6B7C1C2
Classification temperature (°C)9001000120013001400150013001400
Density (kg/m³)65065078078087096060140
Reheat shrinkage (4 h; temperature in parentheses; unit unconfirmed)0.68 (900)0.8 (1000)0.30 (1200)0.30 (1300)0.60 (1400)0.90 (1500)0.70 (1300)0.80 (1400)
Compressive strength (MPa)3.03.21.21.42.43.64.45.7
Flexural strength (unit printed as Wpa; verify)1.51.80.70.81.82.02.53.1
Thermal expansion (temperature in parentheses; unit unconfirmed)0.10 (900)0.23 (1000)0.50 (1000)0.50 (1000)0.48 (1000)0.50 (1000)0.50 (1000)0.50 (1000)
Chemical composition (%)Al₂O₃1212414141624041
Fe₂O₃4.23.61.21.21.40.91.21.2

Data clarification

Published reference figures are not a certified specification for the quoted batch. Confirm the grade, test method, furnace conditions and acceptance requirements before ordering. A dash means no value was stated; classification temperature is not a continuous-service guarantee.

  • Grade labels and numerical values are retained from the reference table. Hh23 spans two density variants.
  • The density entries 60 and 140 for C1 and C2, the value l.1, the grade spelling Ha28, and incomplete strength / expansion units require confirmation; they have not been silently corrected.

Information for quotation

Send the product or grade, furnace zone, operating temperature and atmosphere, dimensions or lining drawing, quantity and delivery destination.