The reference range combines low-density bodies with defined compressive-strength grades. Choose cordierite or mullite according to the furnace zone and thermal cycle.
Typical applications
- Hot-blast, reheating and soaking furnace insulation
- Coke-oven lining insulation and furnace-door structures

Technical specifications
| Property / grade | Cordierite lightweight bricks | Lightweight mullite bricks | |||
|---|---|---|---|---|---|
| DM 0.8 | DM 1.0 | DAS 1.2 | ADS 1.5 | ||
| Bulk density (g/cm³) | 0.8 | 1.0 | 1.2 | 1.5 | |
| Cold compressive strength (MPa) | 7.0 | 12.0 | 13.0 | 16.0 | |
| Reheat linear change (temperature × h; % ≤) | 1200×6 0.1 | 1250×6 0.1 | 1300×6 0.15 | 1350×6 0.15 | |
| Al₂O₃ (%, ≥) | 48 | 50 | 55 | 60 | |
| Fe₂O₃ (%, ≤) | 1.5 | 1.2 | 0.8 | 0.8 | |
| Thermal conductivity at 350 ± 20°C (W/(m·K)) | 0.25 | 0.32 | 0.35 | 0.4 | |
| Maximum service temperature (°C) | 1200 | 1250 | 1300 | 1350 | |
| Thermal shock resistance (1000°C, air cooling, cycles) | 22 | 25 | 30 | 35 | |
Data clarification
Published reference figures are not a certified specification for the quoted batch. Confirm the grade, test method, furnace conditions and acceptance requirements before ordering. A dash means no value was stated; classification temperature is not a continuous-service guarantee.
- DAS 1.2 and ADS 1.5 are different spellings in the original grade headings and are retained. Reheat-change entries combine temperature, time and percentage.
Information for quotation
Send the product or grade, furnace zone, operating temperature and atmosphere, dimensions or lining drawing, quantity and delivery destination.