DADA TECHNOLOGY · ENGINEERED REFRACTORIES · GLOBAL SUPPLY
EnglishEspañolFrançaisDeutschالعربية
DADATECINDUSTRIAL MATERIALS

Gunning Repair Mixes for Ladles & Furnaces

Magnesia and alumina–magnesia repair mixes installed by gunning.

Refractory and silicon carbide product range

The reference lists three repair grades with different chemistry and fired strength. Retention, rebound and compatibility with the existing lining should be assessed for the repair method.

Typical applications

  • Spray-applied ladle and furnace lining repairs
Gunning Repair Mixes for Ladles & Furnaces

Technical specifications

Gunning Repair Mixes for Ladles & Furnaces
GradeMaterialChemical content (%, ≥)Bulk density (g/cm³, ≥)Compressive strength (MPa)Linear change (%, 1500°C × 3 h)Adhesion / retention (%, ≥)
110°C × 24 h, ≥1600°C × 3 h, ≥
DNC-1MagnesiaMgO 802.38300~-2.590
DNC-2MagnesiaMgO 852.48300~-2.590
DNC-3Alumina–magnesiaMgO+Al₂O₃ 802.48350~-2.090

Data clarification

Published reference figures are not a certified specification for the quoted batch. Confirm the grade, test method, furnace conditions and acceptance requirements before ordering. A dash means no value was stated; classification temperature is not a continuous-service guarantee.

  • The Chinese product heading contains an unclear furnace term. The English name uses the general term furnaces rather than assuming a specific furnace type.
  • The strength header specifies 1600°C × 3 h, whereas linear change is stated at 1500°C × 3 h. Shelf life is listed as six months under cool, dry storage; confirm actual packaging and batch date.

Information for quotation

Send the product or grade, furnace zone, operating temperature and atmosphere, dimensions or lining drawing, quantity and delivery destination.