DADA TECHNOLOGY · ENGINEERED REFRACTORIES · GLOBAL SUPPLY
EnglishEspañolFrançaisDeutschالعربية
DADATECINDUSTRIAL MATERIALS

Refractory Castables for Cement Kilns & Boilers

Corundum, high-alumina and clay-based castables for cement and boiler equipment.

Refractory and silicon carbide product range

The grade range addresses different combinations of abrasion, temperature and lining duty. Match the castable to the equipment zone and confirm placement, curing and drying procedures.

Typical applications

  • Kiln hoods, preheater zones, cyclone vessels and cooler outlets
  • Coal-injection pipes and selected boiler wear zones
Refractory Castables for Cement Kilns & Boilers

Technical specifications

Refractory Castables for Cement Kilns & Boilers
Product familyCorundum wear-resistant castablesHigh-alumina castablesClay-based castables
Properties / gradesHh-3.1Hh-3Hh-2.9Hh-2.6Hh-2.4Hh-2.3Hh-2.2
Chemical composition (%)Al₂O₃959285.070655040
SiO₂0.50.61014284196
CaO3.23.23.32.52.556
Bulk density (unit printed as g/m³; verify)3.132.92.62.42.32.2
Strength after heat treatment (MPa; test type to confirm)110℃×24h758590.048454032
1100℃×4h86929770656045
1450℃×4h10010510790807260
Flexural strength (MPa)1100℃×4h8101110986
1450℃×4h1213141211109
Permanent linear change after heating (%)1100℃×4h———±0.2±0.3±0.4±0.5
1450℃×4h±0.3±0.3±0.4±0.3———

Data clarification

Published reference figures are not a certified specification for the quoted batch. Confirm the grade, test method, furnace conditions and acceptance requirements before ordering. A dash means no value was stated; classification temperature is not a continuous-service guarantee.

  • The Hh-2.2 SiO₂ entry is printed 96 alongside Al₂O₃ 40; these figures are inconsistent as a single composition and must be verified.
  • The density unit is printed g/m³, and the strength test name is unclear. Values and blank cells are retained without guessed corrections.

Information for quotation

Send the product or grade, furnace zone, operating temperature and atmosphere, dimensions or lining drawing, quantity and delivery destination.