The bubble-alumina option uses hollow alumina aggregate with an alpha-alumina matrix. Select the proposed composition and insulation grade for the furnace temperature and lining arrangement.
Typical applications
- Metallurgical and petrochemical furnace insulation
- Powder-metallurgy, magnetic-material and electronics furnaces

Technical specifications
| Property / grade | Alumina bubble products | Alumina insulating bricks | ||
|---|---|---|---|---|
| Unresolved reference row (label requires confirmation) | 1.2―1.5 | 1 | 1.2 | |
| Cold compressive strength (MPa) | 10 | 4 | 5 | |
| Reheat linear change (temperature × h; % ≤; notation retained) | 1800×40.3 | 1650×60.4 | 1650×60.3 | |
| Apparent porosity (%) | 60-70 | — | — | |
| Al₂O₃ (%, ≥) | 98.5 | 88 | 92 | |
| SiO₂ (%, ≤) | 0.2 | — | — | |
| Fe₂O₃ (%, ≤) | 0.1 | 0.4 | 0.4 | |
| Thermal conductivity at 350 ± 20°C (W/(m·K), ≤) | 0.6-0.9 | 0.5 | 0.65 | |
| Maximum service temperature (°C) | 1800 | 1500 | 1550 | |
| Refractoriness under load (°C) | 1750 | — | — | |
| Thermal shock resistance (temperature / cycles) | 1100°C, air cooling, >20 cycles | — | — | |
Data clarification
Published reference figures are not a certified specification for the quoted batch. Confirm the grade, test method, furnace conditions and acceptance requirements before ordering. A dash means no value was stated; classification temperature is not a continuous-service guarantee.
- The first numerical row is labelled classification temperature in the reference, but contains 1.2–1.5 / 1 / 1.2. Its meaning and units are unresolved.
- Reheat-change entries such as 1800×40.3 are retained without separating time and change values. Blank cells mean no figure was provided.
Information for quotation
Send the product or grade, furnace zone, operating temperature and atmosphere, dimensions or lining drawing, quantity and delivery destination.